Hi all,
I bought a new Dell Inspiron 15 5567 with SSD Hard Disk of 256GB.
I need to install a second drive and I want ask to community if this model can support two internal Hard Disk (SSD + SATA disk) without remove optical drive.
Someone know if it is possible or I have to use an external disk?
Thanks
Hey guys, I've been trying to get a motherboard replacement for an old XPS 1640. The current board is a Y505R, DA0RM3MBAD0.
There appear to be very few Y505R boards, but have found several Y503R, with model DA0RM3MBAD0. I am getting conflicting feedback from sellers on the compatibility and differences between the two and have not been able to find out what is the real difference.
Thanks in advance for the feedback.
David
Hello everyone.
I've got a little problem or it might be normally, i don't know. but i'd like to make sure otherwise there's gonna be some bad things in the future.
So the problem is that whenever i start my laptop (Alienware 15 R2) connected to the AMP, it randomly sometimes begins to restart, or it might be even twice, and then the windows loads up. Sometimes it stucks in windows loading screen but after 1-2 restarts it begins to work properly. I've also paid attention that if i unplug the AMP and retart the laptop, is might still restart 1-2 times.
Also i would like to mention that whenever everything loads up it works well.
Is that okay or there's some problem?
Thank you for your help.
Hello,
A couple of month ago I bought myself a beautiful laptop. One of the first things I did was remove Windows 10 and install Debian-testiing. I had some minor problems with Uefi so I went back to Legacy.
Last week I thought it was time to completely move to eufi because most linux distributions support it now.
All went fine, but booting is a problem (Just GRUB _ on the screen and no reaction on keyboard input). I do have a USB stick with PMagic and with that I am able to boot my own Debian on the SSD.
Now I think I have found at least one of my problems. Starting my laptop with F2 I can see what my boot settings are: onle UEFI and the first drive to boot from is my SSD. That looks okay, but when i click the view button I get a strange seond row with the specs of my USB stick.
The second row should be: BBS (HD, PM951 NVMe Samsung 512GB)
I can remove the faulty boot option and add a new one, but I cannot change the second row and I think thats causing my "No bootable device found"
Is there some way I can reconfigure the SSD so that the second row gets corrected?
I hope you can understand my dutch school english
Thanks in advance,
B.P. de Vries
yo tengo una pregunta parecida, tengo un inspiron 5110 15R pensaba instalarle una tarjeta wifi mejorada que es la Intel Dual Band Wireless-AC 3160 - network adapter usted cree que podría hacerlo o esto me daría problema
I tried different versions of Ubuntu to see what works and what doesn't. The last time I installed Ubuntu I specified 'nvme0' as the drive to boot form, instead of 'nvme0n1'. That was a mistake. When it rebooted after the installation was finished I found myself staring at a red grub boot menu telling me:
GNU GRUB version 2.02~beta2-36ubuntu3
*If you are seeing this menu, your installation has failed.
Choose from the following options for debugging purposes:
Single user mode
Automated installation of Ubuntu 16.04 (Default)
When choosing 'Automated installation' it sort of re-installs, without giving me any option of configuring the installation. It ends up booting in the same red grub boot menu.
Choosing 'Single user mode' makes it do some stuff and then I see:
Welcome to rescue mode! After logging in, type...
Press Enter for maintenance
(or press Control-D to continue): _
I press Control-D and a version of Ubuntu launches.
I also tried inserting the dell recovery USB-stick I made and then launching it via the bios boot menu. But again I go straight to the red grub boot menu.
Logically thinking I'd say grub need to be removed from the nvme0 disk. I have no clue how to do that though. I don't even know what it is actually. You'd say 'nvme0n1p1' through 4 are the partitions and 'nvme0n1' is the disk. But what then is 'nvme0'?
Anyone an idea what I could try?
Received new laptop but can't get it to connect to old printer. I have limited computer knowledge. Error message says the device can't work properly with USB 3.0. Is there a cable or something I can get so I can use this printer. Or perhaps some other work around?
I am an Art Director and my work just purchased me a new Dell Precision 7510 with the specs below:
- 4K screen
- 32 GB DDR4 RAM
- Xeon E3-1505M
- Nvidia Quadro M2000M
- 512 SSD
My concern is that it seems like the system isn't running smooth. To me it seems like the system is having a hard time running the 4K screen? I'm experiencing a bunch of Windows UI lag and the system just seems glitchy at times. These problems are especially apparent within the Adobe Creative Suite. Are these known problems? Should I RMA?
Thank you!
Recently my OptiPlex 755 with Windows 10 has started acting strangely. From either a fresh boot or return from "hibernate", it begins to boot with all green lights flashing but then stalls to a black screen, but with the green front lights still illuminated. If I hold the power button until it completely shuts down and repress to start, it boots normally. The only error I can find in the Device Manager is a punt in Other Devices for Video Controller with the following description:
Encountered the following problem on my new Inspiron 14 7000 (7437).
Device Manager is showing under Other Devices: PCI Device
The drivers for this device are not installed. (Code 28)
There are no compatible drivers for this device.
PCI bus 1, device 0, function 1
The following values are shown under Details: Property: Hardware IDs:
PCI\VEN_1002&DEV_5B72&SUBSYS_0B031002&REV_00
PCI\VEN_1002&DEV_5B72&SUBSYS_0B031002
PCI\VEN_1002&DEV_5B72&CC_038000
PCI\VEN_1002&DEV_5B72&CC_0380
Under the Event Tab, Information:
Device PCI\VEN_1002&DEV_5B72&SUBSYS_0B031002&REV_00\4&df7e780&0&0108 requires further installation.
How do I fix this?
Thanks,
Ken
II need detail datasheet table modification of Inspiron 5567. Example, I don't know differents between 5567-3195 and 5567-3256, and 5567-3263, and 5567-3546.... Please, attached it
Hi
I noted a strange behavior with my Dell m3800: if I use it on battery (let it discharge for a while, even for a few hours) and, while still running on battery, I attach the AC, then the battery indicators show fully charged and also the OS reports the fully charged state.
In order to make it effectively charge the battery I have to shut it down, unplug the AC and then plug it again.
Is it a known issue or something to do with the BIOS (which should be updated to the latest version)? Or is it some hidden setting in the BIOS?
thanks in advance
Lorenzo
Tried different guides like touchpad not working suddenly in Ubuntu 14.04
$ xinput
⎡ Virtual core pointer id=2 [master pointer (3)]
⎜ ↳ Virtual core XTEST pointer id=4 [slave pointer (2)]
⎜ ↳ Logitech USB Optical Mouse id=10 [slave pointer (2)]
⎜ ↳ SynPS/2 Synaptics TouchPad id=12 [slave pointer (2)]
⎣ Virtual core keyboard id=3 [master keyboard (2)]
↳ Virtual core XTEST keyboard id=5 [slave keyboard (3)]
↳ Power Button id=6 [slave keyboard (3)]
↳ Video Bus id=7 [slave keyboard (3)]
↳ Power Button id=8 [slave keyboard (3)]
↳ Sleep Button id=9 [slave keyboard (3)]
↳ AT Translated Set 2 keyboard id=11 [slave keyboard (3)]
↳ Dell WMI hotkeys id=13 [slave keyboard (3)]
↳ Integrated_Webcam_HD id=14 [slave keyboard (3)]
As you can see on xinput comes up only the touchpad but are both shown in the input devices
$ cat /proc/bus/input/devices
I: Bus=0019 Vendor=0000 Product=0005 Version=0000
N: Name="Lid Switch"
P: Phys=PNP0C0D/button/input0
S: Sysfs=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
U: Uniq=
H: Handlers=event0
B: PROP=0
B: EV=21
B: SW=1
I: Bus=0019 Vendor=0000 Product=0001 Version=0000
N: Name="Power Button"
P: Phys=PNP0C0C/button/input0
S: Sysfs=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
U: Uniq=
H: Handlers=kbd event1
B: PROP=0
B: EV=3
B: KEY=10000000000000 0
I: Bus=0019 Vendor=0000 Product=0003 Version=0000
N: Name="Sleep Button"
P: Phys=PNP0C0E/button/input0
S: Sysfs=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2
U: Uniq=
H: Handlers=kbd event2
B: PROP=0
B: EV=3
B: KEY=4000 0 0
I: Bus=0019 Vendor=0000 Product=0001 Version=0000
N: Name="Power Button"
P: Phys=LNXPWRBN/button/input0
S: Sysfs=/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
U: Uniq=
H: Handlers=kbd event3
B: PROP=0
B: EV=3
B: KEY=10000000000000 0
I: Bus=0011 Vendor=0001 Product=0001 Version=ab41
N: Name="AT Translated Set 2 keyboard"
P: Phys=isa0060/serio0/input0
S: Sysfs=/devices/platform/i8042/serio0/input/input4
U: Uniq=
H: Handlers=sysrq kbd event4 leds
B: PROP=0
B: EV=120013
B: KEY=1100f02902000 8380307cf910f001 feffffdfffefffff fffffffffffffffe
B: MSC=10
B: LED=7
I: Bus=0019 Vendor=0000 Product=0006 Version=0000
N: Name="Video Bus"
P: Phys=LNXVIDEO/video/input0
S: Sysfs=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input7
U: Uniq=
H: Handlers=kbd event5
B: PROP=0
B: EV=3
B: KEY=3e000b00000000 0 0 0
I: Bus=0011 Vendor=0002 Product=0007 Version=01a1
N: Name="SynPS/2 Synaptics TouchPad"
P: Phys=isa0060/serio1/input0
S: Sysfs=/devices/platform/i8042/serio1/input/input6
U: Uniq=
H: Handlers=mouse0 event6
B: PROP=5
B: EV=b
B: KEY=e520 10000 0 0 0 0
B: ABS=660800011000003
I: Bus=0003 Vendor=046d Product=c05a Version=0111
N: Name="Logitech USB Optical Mouse"
P: Phys=usb-0000:00:14.0-2/input0
S: Sysfs=/devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.0/0003:046D:C05A.0001/input/input8
U: Uniq=
H: Handlers=mouse1 event7
B: PROP=0
B: EV=17
B: KEY=70000 0 0 0 0
B: REL=103
B: MSC=10
I: Bus=0019 Vendor=0000 Product=0000 Version=0000
N: Name="Dell WMI hotkeys"
P: Phys=wmi/input0
S: Sysfs=/devices/virtual/input/input9
U: Uniq=
H: Handlers=kbd event8
B: PROP=0
B: EV=13
B: KEY=101000b00000400 100000 e000000000000 0
B: MSC=10
I: Bus=0003 Vendor=0bda Product=568b Version=6318
N: Name="Integrated_Webcam_HD"
P: Phys=usb-0000:00:14.0-5/button
S: Sysfs=/devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5:1.0/input/input10
U: Uniq=
H: Handlers=kbd event9
B: PROP=0
B: EV=3
B: KEY=100000 0 0 0
Booting via liveusb they work fine.
Any clues?
edit: here the same commands that I did run from the live usb:
xinput list --long
⎡ Virtual core pointer id=2 [master pointer (3)]
Reporting 8 classes:
Class originated from: 12. Type: XIButtonClass
Buttons supported: 12
Button labels: "Button Left" "Button Middle" "Button Right" "Button Wheel Up" "Button Wheel Down" "Button Horiz Wheel Left" "Button Horiz Wheel Right" None None None None None
Button state:
Class originated from: 12. Type: XIValuatorClass
Detail for Valuator 0:
Label: Rel X
Range: 0.000000 - 1216.000000
Resolution: 12000 units/m
Mode: relative
Class originated from: 12. Type: XIValuatorClass
Detail for Valuator 1:
Label: Rel Y
Range: 0.000000 - 680.000000
Resolution: 12000 units/m
Mode: relative
Class originated from: 12. Type: XIValuatorClass
Detail for Valuator 2:
Label: Rel Horiz Scroll
Range: 0.000000 - -1.000000
Resolution: 0 units/m
Mode: relative
Class originated from: 12. Type: XIValuatorClass
Detail for Valuator 3:
Label: Rel Vert Scroll
Range: 0.000000 - -1.000000
Resolution: 0 units/m
Mode: relative
Class originated from: 12. Type: XIScrollClass
Scroll info for Valuator 2
type: 2 (horizontal)
increment: 27.000000
flags: 0x0
Class originated from: 12. Type: XIScrollClass
Scroll info for Valuator 3
type: 1 (vertical)
increment: 27.000000
flags: 0x0
Class originated from: 12. Type: XITouchClass
Touch mode: dependent
Max number of touches: 5
⎜ ↳ Virtual core XTEST pointer id=4 [slave pointer (2)]
Reporting 3 classes:
Class originated from: 4. Type: XIButtonClass
Buttons supported: 10
Button labels: "Button Left" "Button Middle" "Button Right" "Button Wheel Up" "Button Wheel Down" "Button Horiz Wheel Left" "Button Horiz Wheel Right" None None None
Button state:
Class originated from: 4. Type: XIValuatorClass
Detail for Valuator 0:
Label: Rel X
Range: -1.000000 - -1.000000
Resolution: 0 units/m
Mode: relative
Class originated from: 4. Type: XIValuatorClass
Detail for Valuator 1:
Label: Rel Y
Range: -1.000000 - -1.000000
Resolution: 0 units/m
Mode: relative
⎜ ↳ ELAN Touchscreen id=10 [slave pointer (2)]
Reporting 9 classes:
Class originated from: 10. Type: XIButtonClass
Buttons supported: 5
Button labels: "Button Unknown" "Button Unknown" "Button Unknown" "Button Wheel Up" "Button Wheel Down"
Button state:
Class originated from: 10. Type: XIValuatorClass
Detail for Valuator 0:
Label: Abs MT Position X
Range: 0.000000 - 3360.000000
Resolution: 11000 units/m
Mode: absolute
Current value: 29.000000
Class originated from: 10. Type: XIValuatorClass
Detail for Valuator 1:
Label: Abs MT Position Y
Range: 0.000000 - 1872.000000
Resolution: 11000 units/m
Mode: absolute
Current value: 185.000000
Class originated from: 10. Type: XIValuatorClass
Detail for Valuator 2:
Label: Abs MT Touch Major
Range: 0.000000 - 255.000000
Resolution: 0 units/m
Mode: absolute
Current value: 1.000000
Class originated from: 10. Type: XIValuatorClass
Detail for Valuator 3:
Label: Abs MT Touch Minor
Range: 0.000000 - 255.000000
Resolution: 0 units/m
Mode: absolute
Current value: 1.000000
Class originated from: 10. Type: XIValuatorClass
Detail for Valuator 4:
Label: Abs MT Orientation
Range: 0.000000 - 1.000000
Resolution: 0 units/m
Mode: absolute
Current value: 0.000000
Class originated from: 10. Type: XIValuatorClass
Detail for Valuator 5:
Label: Abs MT Tool X
Range: 0.000000 - 3360.000000
Resolution: 11000 units/m
Mode: absolute
Current value: 29.000000
Class originated from: 10. Type: XIValuatorClass
Detail for Valuator 6:
Label: Abs MT Tool Y
Range: 0.000000 - 1872.000000
Resolution: 11000 units/m
Mode: absolute
Current value: 186.000000
Class originated from: 10. Type: XITouchClass
Touch mode: direct
Max number of touches: 10
⎜ ↳ DLL075B:01 06CB:76AF Touchpad id=12 [slave pointer (2)]
Reporting 8 classes:
Class originated from: 12. Type: XIButtonClass
Buttons supported: 12
Button labels: "Button Left" "Button Middle" "Button Right" "Button Wheel Up" "Button Wheel Down" "Button Horiz Wheel Left" "Button Horiz Wheel Right" None None None None None
Button state:
Class originated from: 12. Type: XIValuatorClass
Detail for Valuator 0:
Label: Rel X
Range: 0.000000 - 1216.000000
Resolution: 12000 units/m
Mode: relative
Class originated from: 12. Type: XIValuatorClass
Detail for Valuator 1:
Label: Rel Y
Range: 0.000000 - 680.000000
Resolution: 12000 units/m
Mode: relative
Class originated from: 12. Type: XIValuatorClass
Detail for Valuator 2:
Label: Rel Horiz Scroll
Range: 0.000000 - -1.000000
Resolution: 0 units/m
Mode: relative
Class originated from: 12. Type: XIValuatorClass
Detail for Valuator 3:
Label: Rel Vert Scroll
Range: 0.000000 - -1.000000
Resolution: 0 units/m
Mode: relative
Class originated from: 12. Type: XIScrollClass
Scroll info for Valuator 2
type: 2 (horizontal)
increment: 27.000000
flags: 0x0
Class originated from: 12. Type: XIScrollClass
Scroll info for Valuator 3
type: 1 (vertical)
increment: 27.000000
flags: 0x0
Class originated from: 12. Type: XITouchClass
Touch mode: dependent
Max number of touches: 5
⎜ ↳ SynPS/2 Synaptics TouchPad id=15 [slave pointer (2)]
Reporting 9 classes:
Class originated from: 15. Type: XIButtonClass
Buttons supported: 12
Button labels: "Button Left" "Button Middle" "Button Right" "Button Wheel Up" "Button Wheel Down" "Button Horiz Wheel Left" "Button Horiz Wheel Right" None None None None None
Button state:
Class originated from: 15. Type: XIValuatorClass
Detail for Valuator 0:
Label: Rel X
Range: 1276.000000 - 5666.000000
Resolution: 0 units/m
Mode: relative
Class originated from: 15. Type: XIValuatorClass
Detail for Valuator 1:
Label: Rel Y
Range: 1118.000000 - 4734.000000
Resolution: 0 units/m
Mode: relative
Class originated from: 15. Type: XIValuatorClass
Detail for Valuator 2:
Label: Rel Horiz Scroll
Range: 0.000000 - -1.000000
Resolution: 0 units/m
Mode: relative
Class originated from: 15. Type: XIValuatorClass
Detail for Valuator 3:
Label: Rel Vert Scroll
Range: 0.000000 - -1.000000
Resolution: 0 units/m
Mode: relative
Class originated from: 15. Type: XIValuatorClass
Detail for Valuator 4:
Label: Abs MT Pressure
Range: 0.000000 - 255.000000
Resolution: 0 units/m
Mode: absolute
Current value: 0.000000
Class originated from: 15. Type: XIScrollClass
Scroll info for Valuator 2
type: 2 (horizontal)
increment: 113.000000
flags: 0x0
Class originated from: 15. Type: XIScrollClass
Scroll info for Valuator 3
type: 1 (vertical)
increment: 113.000000
flags: 0x0
Class originated from: 15. Type: XITouchClass
Touch mode: dependent
Max number of touches: 2
⎣ Virtual core keyboard id=3 [master keyboard (2)]
Reporting 1 classes:
Class originated from: 14. Type: XIKeyClass
Keycodes supported: 248
↳ Virtual core XTEST keyboard id=5 [slave keyboard (3)]
Reporting 1 classes:
Class originated from: 5. Type: XIKeyClass
Keycodes supported: 248
↳ Power Button id=6 [slave keyboard (3)]
Reporting 1 classes:
Class originated from: 6. Type: XIKeyClass
Keycodes supported: 248
↳ Video Bus id=7 [slave keyboard (3)]
Reporting 1 classes:
Class originated from: 7. Type: XIKeyClass
Keycodes supported: 248
↳ Power Button id=8 [slave keyboard (3)]
Reporting 1 classes:
Class originated from: 8. Type: XIKeyClass
Keycodes supported: 248
↳ Sleep Button id=9 [slave keyboard (3)]
Reporting 1 classes:
Class originated from: 9. Type: XIKeyClass
Keycodes supported: 248
↳ Integrated_Webcam_HD id=11 [slave keyboard (3)]
Reporting 1 classes:
Class originated from: 11. Type: XIKeyClass
Keycodes supported: 248
↳ Intel HID events id=13 [slave keyboard (3)]
Reporting 1 classes:
Class originated from: 13. Type: XIKeyClass
Keycodes supported: 248
↳ AT Translated Set 2 keyboard id=14 [slave keyboard (3)]
Reporting 1 classes:
Class originated from: 14. Type: XIKeyClass
Keycodes supported: 248
↳ Dell WMI hotkeys id=16 [slave keyboard (3)]
Reporting 1 classes:
Class originated from: 16. Type: XIKeyClass
Keycodes supported: 248
$ cat /proc/
I: Bus=0019 Vendor=0000 Product=0005 Version=0000
N: Name="Lid Switch"
P: Phys=PNP0C0D/button/input0
S: Sysfs=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
U: Uniq=
H: Handlers=event0
B: PROP=0
B: EV=21
B: SW=1
I: Bus=0019 Vendor=0000 Product=0001 Version=0000
N: Name="Power Button"
P: Phys=PNP0C0C/button/input0
S: Sysfs=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
U: Uniq=
H: Handlers=kbd event1
B: PROP=0
B: EV=3
B: KEY=10000000000000 0
I: Bus=0019 Vendor=0000 Product=0003 Version=0000
N: Name="Sleep Button"
P: Phys=PNP0C0E/button/input0
S: Sysfs=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2
U: Uniq=
H: Handlers=kbd event2
B: PROP=0
B: EV=3
B: KEY=4000 0 0
I: Bus=0019 Vendor=0000 Product=0001 Version=0000
N: Name="Power Button"
P: Phys=LNXPWRBN/button/input0
S: Sysfs=/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
U: Uniq=
H: Handlers=kbd event3
B: PROP=0
B: EV=3
B: KEY=10000000000000 0
I: Bus=0011 Vendor=0001 Product=0001 Version=ab41
N: Name="AT Translated Set 2 keyboard"
P: Phys=isa0060/serio0/input0
S: Sysfs=/devices/platform/i8042/serio0/input/input4
U: Uniq=
H: Handlers=sysrq kbd event4 leds
B: PROP=0
B: EV=120013
B: KEY=1100f02902000 8380307cf910f001 feffffdfffefffff fffffffffffffffe
B: MSC=10
B: LED=7
I: Bus=0019 Vendor=0000 Product=0006 Version=0000
N: Name="Video Bus"
P: Phys=LNXVIDEO/video/input0
S: Sysfs=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input7
U: Uniq=
H: Handlers=kbd event5
B: PROP=0
B: EV=3
B: KEY=3e000b00000000 0 0 0
I: Bus=0011 Vendor=0002 Product=0007 Version=01a1
N: Name="SynPS/2 Synaptics TouchPad"
P: Phys=isa0060/serio1/input0
S: Sysfs=/devices/platform/i8042/serio1/input/input6
U: Uniq=
H: Handlers=mouse0 event6
B: PROP=5
B: EV=b
B: KEY=e520 10000 0 0 0 0
B: ABS=660800011000003
I: Bus=0019 Vendor=0000 Product=0000 Version=0000
N: Name="Intel HID events"
P: Phys=
S: Sysfs=/devices/platform/INT33D5:00/input/input8
U: Uniq=
H: Handlers=rfkill kbd event7
B: PROP=0
B: EV=13
B: KEY=81000300000000 5000004000 1e294000000020 0
B: MSC=10
I: Bus=0003 Vendor=04f3 Product=20d0 Version=0110
N: Name="ELAN Touchscreen"
P: Phys=usb-0000:00:14.0-4/input0
S: Sysfs=/devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.0/0003:04F3:20D0.0001/input/input9
U: Uniq=
H: Handlers=mouse1 event8
B: PROP=2
B: EV=b
B: KEY=400 0 0 0 0 0
B: ABS=3273800000000003
I: Bus=0003 Vendor=0bda Product=568b Version=6318
N: Name="Integrated_Webcam_HD"
P: Phys=usb-0000:00:14.0-5/button
S: Sysfs=/devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5:1.0/input/input11
U: Uniq=
H: Handlers=kbd event9
B: PROP=0
B: EV=3
B: KEY=100000 0 0 0
I: Bus=0019 Vendor=0000 Product=0000 Version=0000
N: Name="Dell WMI hotkeys"
P: Phys=wmi/input0
S: Sysfs=/devices/virtual/input/input12
U: Uniq=
H: Handlers=kbd event10
B: PROP=0
B: EV=13
B: KEY=101000b00000400 100000 e000000000000 0
B: MSC=10
I: Bus=0018 Vendor=06cb Product=76af Version=0100
N: Name="DLL075B:01 06CB:76AF Touchpad"
P: Phys=i2c-DLL075B:01
S: Sysfs=/devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-7/i2c-DLL075B:01/0018:06CB:76AF.0002/input/input13
U: Uniq=
H: Handlers=mouse2 event11
B: PROP=5
B: EV=b
B: KEY=e520 10000 0 0 0 0
B: ABS=260800000000003
at this link the complete xorg log on the live cd here instead the complete xorg log on the "normal" install
cfr askubuntu.com/.../touchpad-and-touchscreen-stopped-working-on-dell-xps-13-9360-with-ubuntu-16-04
I bought this computer a few days ago and the hinge is creaking whenever I open it. I can't use the online support because it says my service code is invalid.
Hi All,
I am going to replace my Optical Drive with caddy adapter.
The dimension of optical drive for Inspiron 5567 is 9.00mm or 9.5mm?
Thanks
I just registered a new dell 15 i5559 3333 SLV dell signature edition. I had not gotten even a chance to install any software. Dreadfully slow. Is this is a known issue. Should I just return it back or is there a simple remedy? Any thoughts is appreciated. 8 GB Ram.
Hi. I have a dell inspiron laptop. My problem starts when i tried to update my bios from a07 to a15. While the update is running my laptop screen suddenly turned blank but my laptop is still on. What should i do?
My external speakers for my E7470 laptop do not output sound unless the green stereo cable is plugged directly into it. When the audio cable is plugged into the port replicator, it simply won’t output sound... The sound goes through the laptop speakers instead. The in the Sound settings, the speakers show to be playing but the audio goes through my laptop. The audio output won’t switch from my laptop port to the port replicator. Everything was fine before but now it's just not working. Any suggestions on how to fix this issue?
Hi
I have Dell 3537 laptop I 'm Facing Touchpad Issue On My Laptop
It's Worked Not Correctly , Sometimes It's freeze and i Turned it Off Using (fn+F3) Then Turn it on, It's start Working. Sometimes It force me to restart Laptop To Work again .
But Now It's Completely stop working and Does Not appear in Device Manager
I reinstall Drivers , OS. But TouchPad Does Not Work Also Not Appear in Device Manager
Please Help to Solve my Issue
Thanks.
I have had this unit for about 4 years now. My issue is it only powers up when the battery is removed. If I install the battery, the unit power shuts off. Any clues? Thanks for any help.
I have been working on upgrade my laptop to work with solidworks better and needed a bit of help.
Here are the laptop specs running windows 10
2nd generation Intel® Core™ i5-2410M processor 2.30 GHz
16GB Shared Dual Channel DDR3 Memory (upgraded this)
NVIDIA® GeForce® GT 525m 1GB graphics
Upgraded to a SSD
What I would like to do is upgrade the two last things which are the graphics card (if even possible) buy getting a new board and the processor.
From what I have researched these processors will work in the same socket as my i5 but which one is better and will there be a big improvement over the i5 that i have??
i7-2860QM
i7-2820QM
i7-2760QM
i7-2720QM
i7-2630QM
from here
en.community.dell.com/.../19476474
Lastly is it possible to upgrade the graphics card to the GT540m 2gb by installing a new motherboard? Will I gain much over the GT525??
thanks!