Hi Arisztid,
Below factors may cause system warm to the touch:
- Watching a DVD/Blu-ray.
- Streaming online video.
- Watching or Interacting with Flash Content
- Playing Video Games or Online Games.
- Using near a heat source or in a hot environment
Tips to prevent your computer from overheating:
Proper placement:
Locate your computer where the best airflow and least dust contact is allowed.
- Place your computer a few inches from the wall.
- Avoid positioning it inside a computer cabinet or directly onto the floor or carpet. It’s better to find a computer stand to elevate the computer several inches off the ground to reduce dust accumulation.
- Keep the room temperature to a maximum of 75 to 85 degrees (Fahrenheit) and around 35% to 40% humidity level.
Check for proper airflow:
Make sure the computer vents and fans remain clean of dust which can prevent the heat and fresh air to pass through efficiently. Additionally, verify that all fans are spinning correctly without unusual noises.
Update the System BIOS:
An out of date BIOS can cause heat issues by having an outdated temperature table for the system.
Click the following link to update BIOS on the computer:
- During BIOS update verify that the computer is connected to an AC Adapter.
- Disconnect any third party peripherals connected to the computer before performing BIOS update.
- Do not turn off the computer during the BIOS update.
- Do not restart the computer during the BIOS update.
Note: Plug your computer to a good, working wall jack before you update the BIOS. If you experience a loss of AC power or a significant voltage sag/spike during the BIOS flash, you will either have to buy a new BIOS chip or buy a new motherboard.
For the hard drive issue, let’s try running diagnostics on the computer (hold down the Fn + Power button simultaneously)
Awaiting your response!