Hi ruizhangmsu,
Try the steps below and confirm if the system is able to boot to Windows:
• Change the SATA operation in BIOS (tap F2 on start up),from Intel Smart Response to AHCI.
• Save changes in BIOS.
• Reboot the system
• Go back into Bios (F2) and change SATA operation from AHCI to Intel Smart Response.
• Save the changes
• Reboot the system.
• System should boot normally into Windows.
Try couple of times and make sure system is booting to Windows normally.
Note: Please let me know if the system is able to boot to Windows after following the above steps,as we need to perform few more steps within Windows.